Product Category Picture
Application Picture
Application Picture
1   1

Repair mortar DEC

The ready-to-use, extrudable joint mortar for the long-lasting closing of masonry joints

The fischer repairing mortar DEC is ideal for the lasting renovation of joints, the closing of cracks in masonry and the optical repairing of chips and breaks in façades and masonry. It can close drill holes that have burst, as well as downpipes, railings, lamps and cable connections. The practically odourless mortar can be easily processed thanks to its stable consistency. It offers really good resistance to weather, ageing and UV. Once a skin has formed, the fischer DEC is rainproof. fischer DEC is not suitable for permanent exposure to water.

Opis proizvoda

Advantages
  • The ready-to-use, sprayable joint mortar means that there is no need to add water or carry out time-consuming pre-mixing work. It enables clean, purposeful work. This means that you avoid dirtying surrounding areas and wasting material.
  • Good adhesion even on slightly damp substrates practically allows for all-weather work and prevents forced interruptions.
  • The structure of the high-quality water-based polymer has been perfectly designed with the visual appearance of the mortar in mind. This ensures a discreet joint and perfect appearance.

Dostupne verzije proizvoda


2 pronađeno verzija proizvoda

2 pronađeno verzija proizvoda

Verzija
Contents
Contents
Packaging
Amount
Broj artikla 534474

310 [ml]

Cartridge

1 [pcs.]

Broj artikla 524315

[ml]

5 pieces

Polybag

1 [pcs.]

Pregledano 2 od 2 verzija
0

Primjena i dozvola

Applications
  • Repairing masonry joints
  • Closing masonry cracks
  • Repairing chipped edges
  • Closing drill holes in facing masonry during repair work
  • General repair work (e.g. drill holes with cracked edges)
  • For a better reusability, to close opened cartridges with adhesive tape
Building materials
  • Concrete
  • Pumice
  • Fibre cement
  • Gypsum
  • Wooden materials
  • Sand-lime brick
  • Ceramics
  • Clinker brick
  • Masonry
  • Aerated concrete
  • Plaster
  • Cement
  • Brick
* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Uputa za sastavljanje

Functionality
  • Chemical base: 1C polymer dispersion
  • Plastic
  • Consistency: Firm
  • Practically odour-free
  • Skin formation time: Approx. 10 minutes.
  • Processing temperature: +5 °C to +40 °C (not below +5 °C)
  • Temperature resistance up to -30 °C (fully cured)
  • Weather-proof after approx. 24 hours.
  • Very good resistance to UV, weather and ageing
  • Paintable
  • Frost-protected in the cartridge
  • Free of silicone, MDI and solvents
  • Not recommended for caulking guns with a transmission ratio of less than 10:1 (e.g. KPM1)

Dokumenti za preuzimanje

sc93-delivery-2