Product Category Picture
Application Picture
Application Picture
1   1

Injections anchor sleeve FIS H K

The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry

The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS GREEN, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed.

Opis proizvoda

Advantages
  • The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V, FIS GREEN and FIS P Plus, and ensures sparing mortar use with the best interlock.
  • The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters.
  • The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation.
  • The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation.

Dostupne verzije proizvoda


21 pronađeno verzija proizvoda

21 pronađeno verzija proizvoda

Verzija
ETA-approval
Drill diameter

d0

Min. drill hole depth

h1

Effect. anchorage depth

hef

Broj artikla 041900

12 [mm]

60 [mm]

50 [mm]

Broj artikla 041901

12 [mm]

95 [mm]

85 [mm]

Broj artikla 052582

12 [mm]

95 [mm]

85 [mm]

Broj artikla 503787

12 [mm]

95 [mm]

85 [mm]

Broj artikla 044583

16 [mm]

[mm]

85 [mm]

Broj artikla 041902

16 [mm]

95 [mm]

85 [mm]

Broj artikla 052583

16 [mm]

95 [mm]

85 [mm]

Broj artikla 503788

16 [mm]

95 [mm]

85 [mm]

Broj artikla 041903

16 [mm]

140 [mm]

110 [mm]

Broj artikla 044578

16 [mm]

140 [mm]

130 [mm]

Broj artikla 532658

16 [mm]

140 [mm]

130 [mm]

Broj artikla 044584

16 [mm]

140 [mm]

130 [mm]

Broj artikla 045707

18 [mm]

140 [mm]

130 [mm]

Broj artikla 046703

20 [mm]

140 [mm]

110 [mm]

Broj artikla 046704

20 [mm]

210 [mm]

180 [mm]

Broj artikla 044585

20 [mm]

95 [mm]

85 [mm]

Broj artikla 041904

20 [mm]

95 [mm]

85 [mm]

Broj artikla 522833

20 [mm]

95 [mm]

85 [mm]

Legenda = Dopuštenje dostupno = Dopuštenje nije dostupno
Više rezultata Pregledano 18 od 21 verzija
0

Primjena i dozvola

Applications
  • Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS GREEN
Building materials
Approved for:
  • Vertically perforated brick
  • Hollow blocks made from lightweight concrete
  • Hollow blocks made from concrete
  • Perforated sand-lime brick
  • Solid sand-lime brick
  • Solid brick
Also suitable for:
  • Hollow pumice slabs
  • Slabs made of hollow brick and other perforated brick
  • Solid pumice and other solid building materials
* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Dozvola/dopuštenje

  • ETA-10/0383
  • ETA-11/0419, ETAG 029
  • ETA-14/0471, ETAG 029
  • ETA-15/0263
  • DoP 0189
  • DoP 0195
  • DoP No. 0026
  • DoP No. 0126
Za detalje pogledajte odgovarajuće dokumente

Uputa za sastavljanje

Functionality
  • The system can be used with any of the following injection mortars: FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS GREEN or FIS P Plus. FIS P can be used but does not have approvals.
  • The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
  • The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
  • Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture
Mounting Strip 1 Picture

Dokumenti za preuzimanje

Dodatni dokumenti

Odobrenja

Naslov Tip Kreirano Vrijedi do
ETA - European Technical Assessment (PDF, 21 MB) European Technical Assessment fischer Injection resin FIS V for fixing in masonry ETA-10/0383 7.7.2020.
ETA - European Technical Assessment (PDF, 3 MB) European Technical Assessment for fischer injection system FIS P Plus masonry ETA-11/0419, ETAG 029 30.10.2015.
ETA - European Technical Assessment (PDF, 3 MB) European Technical Assessment fischer Injection resin FIS GREEN for fixing in masonry ETA-14/0471, ETAG 029 3.2.2015.
ETA - European Technical Assessment (PDF, 7 MB) European Technical Assessment for fischer injection system FIS VL for use in masonry ETA-15/0263 7.7.2020.
DOP - Declaration of Performance (PDF, 21 MB) DoP 0189 21.7.2019.
DOP - Declaration of Performance (PDF, 7 MB) DoP 0195 4.8.2020.
DOP - Declaration of Performance (PDF, 51 MB) Declaration of Performance fischer Injection resin FIS V, according European Technical Assessment ETA-10/0383 DoP No. 0026 20.7.2015.
DOP - Declaration of Performance (PDF, 32 MB) Declaration of Performance fischer Injection resin FIS V, according European Technical Assessment ETA-10/0383 DoP No. 0126 16.10.2017.

Sastavni dijelovi i povezane kategorije

10.209.131.65