Plasterboard fixing metal GKM

The self-tapping metal fixing for gypsum plasterboard and gypsum fibreboard.

The fixing is screwed in the pre-positioned installation into the Gypsum plasterboard and gypsum fibreboards flush to the surface. The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity. The fischer GKM can hold wood, sheet metal and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e.g. lights, electrical installations and fitting accessories securely and quickly.

Opis proizvoda

Advantages

Due to its material properties, the GKM can be used in gypsum plasterboard and gypsum fibreboard, and can be used with the most wide-ranging screws, hooks and eye screws. This allows for a broad range of applications.
The sharp, self-tapping thread enables a secure, positive fit fixing. This achieves a high load-bearing capacity.
The cross-drive recess means that a standard screwdriver or bit can be used. No special setting tool is required.
The short fixing length means that only a small amount of space is required behind the board. As a result, the GKM can also be used in the case of unknown board thickness and cavity depth.

Dostupne verzije proizvoda

7 pronađeno verzija proizvoda

Verzija

Anchor length

Min. thickness to first supporting layer

Screw dimension

d_s x l_s

Drive

Pregledano 7 od 7 verzija

Primjena i dozvola

Applications

Pictures
Lighting
Electrical installations
Fitting accessories

Building materials

Gypsum fibreboard
Gypsum plasterboard

* Detaljne informacije o građevinskom materijalu možete pronaći u registracijskom dokumentu.

Uputa za sastavljanje

Functionality

The GKM is suitable for pre-positioned installation.
The self-tapping metal fixing GKM taps itself into the plasterboard with a positive fit.
Flush installation in the board building material. Overtightening the fixing should be avoided. Therefore, the installation torque should be limited when using a battery operated screwdriver.
Adapted for wood, self-tapping and chipboard screws of 4.0 to 5.0 mm diameter.
Pre-drill with a Ø 8 mm drill bit when using gypsum fibreboard and double-planked gypsum plasterboard.
Not suitable for tiled plasterboard.

Dokumenti za preuzimanje

Dodatni dokumenti

Load Table (PDF, 26 KB)

Sastavni dijelovi i povezane kategorije

Sastavni dijelovi

Masonry drill bit Pointer M

Masonry drill bit Pointer M

The perfect drill bit for all perforated building materials

Više informacija

Anchor length l	31 [mm]
Min. thickness to first supporting layer t	35 [mm]
Screw dimension d_s x l_s	4.0 - 5.0 x Ls [mm]
Drive	—
Contents	—
Packaging	Folding box
Amount	100 [pcs.]
GTIN (EAN-Code)	4006209245569

Anchor length l	31 [mm]
Min. thickness to first supporting layer t	35 [mm]
Screw dimension d_s x l_s	4.0 - 5.0 x Ls [mm]
Drive	—
Contents	10 x GKM
Packaging	Blister card
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962062441

Anchor length l	31 [mm]
Min. thickness to first supporting layer t	35 [mm]
Screw dimension d_s x l_s	4.0 - 5.0 x Ls [mm]
Drive	—
Contents	10 x GKM
Packaging	Blister card
Amount	10 [pcs.]
GTIN (EAN-Code)	4048962069563

Anchor length l	31 [mm]
Min. thickness to first supporting layer t	35 [mm]
Screw dimension d_s x l_s	4.5 x 35 [mm]
Drive	PZ2
Contents	6 x GKM, 6 x chipboard screw 4.5 x 35
Packaging	Blister card
Amount	6 [pcs.]
GTIN (EAN-Code)	4006209151587

Anchor length l	31 [mm]
Min. thickness to first supporting layer t	35 [mm]
Screw dimension d_s x l_s	4.5 x 35 [mm]
Drive	PZ2
Contents	6 x GKM, 6 x chipboard screw 4.5 x 35
Packaging	Blister card
Amount	6 [pcs.]
GTIN (EAN-Code)	4006209909171