• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
Concrete screw UltraCut FBS II US
  • Product Picture: "fischer UltraCut FBS II 8x190 140/125 US TX"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
  • Youtube VideoYoutube VideoYoutube Video
    • Youtube VideoYoutube VideoYoutube Video
    • Product Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
    • Application Picture
      Broj artikla 558221

      fischer UltraCut FBS II 8x190 140/125 US TX

      Produkt varijante
      Download of image data
      Top Features
      • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.
      • The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates.

      Prednosti / opis proizvoda

      The high-performance concrete screw for absolute installation ease.
      Advantages
      • With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
      • Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
      • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
      • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
      • The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
      • The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
      • The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.
      The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.
      Youtube VideoYoutube VideoYoutube Video

      Upotreba i atesti

      Applications
      • Guard rails
      • Consoles/Base plates
      • Metal profiles
      • Shelving systems
      • Protection barriers
      • Results / beam anchors
      • Temporary anchoring, e.g. of building site equipment
      • Shuttering props
      • Reinforcement of bridges
      • Rehabilitation of old and ailing buildings
      • Rehabilitation of car parks
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      • Reinforcement of existing concrete structures
      • Bricks of clay (EN771-1)
      • Solid sand-lime brick (EN771-2)
      • Perforated sand-lime brick (EN771-2)
      Also suitable for:
      • Concrete C12/15
      • Solid building materials
      • Masonry with a dense structure
      Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.
      Atesti
      • ETA-15/0352
      • ETA-20/0321
      • ETA-20/0134
      • DoP No. 0185
      • DoP No. 0227
      • DoP No. 0225
      • Z-21.8-2049

      Uputstva za montažu

      Functionality
      • The UltraCut FBS II is recommended for the push-through installation.
      • Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
      • We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
      • The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).
      Vidi uputstvo za montažu u PDF-u
      Mounting Strip 1 Picture
      1 / 9
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture
      • 7
        Mounting Strip 1 Picture
      • 8
        Mounting Strip 1 Picture
      • 9
        Mounting Strip 1 Picture
      Mounting Strip 2 Picture
      1 / 3
      • 1
        Mounting Strip 2 Picture
      • 2
        Mounting Strip 2 Picture
      • 3
        Mounting Strip 2 Picture
      Mounting Strip 3 Picture
      1 / 2
      • 1
        Mounting Strip 3 Picture
      • 2
        Mounting Strip 3 Picture

      Tehnički podaci

      ETA-approval
      DIBt-approval
      Drill diameter (
      d0
      )      		8 mm
      Min. drill hole depth for through fixings (
      h2
      )      		200 mm
      Screw dimension (
      ds x ls
      )      		10.0 x 190 mm
      Nominal embedment depth / thickness of fixture (
      hnom1 / tfix
      )      		50 / 140 mm
      Nominal embedment depth / thickness of fixture (
      hnom3 / tfix
      )      		65 / 125 mm
      Drive TX40 / SW 13
      Amount 20 pcs
      GTIN (EAN-Code) 4048962410631

      Dokumenti za preuzimanje

      ETA Certification Document
      pdf, ETA-15/0352
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete
      izdato 05. 10. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0227
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)
      izdato 19. 10. 2020.
      ETA Certification Document
      pdf, ETA-20/0321
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Connector for Strengthening of existing concrete structures by concrete overlay
      izdato 19. 06. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0225
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      izdato 03. 07. 2020.
      ETA Certification Document
      pdf, ETA-20/0134
      European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry
      izdato 14. 07. 2022.
      DOP - Declaration of Performance
      pdf, DoP No. 0185
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      izdato 27. 11. 2020.
      DIBt, National German Certification
      pdf, Z-21.8-2049
      National technical approval - fischer concrete screw ULTRACUT FBS II for the temporary fastening of building site equipment
      Vrijedi od 14. 07. 2021.
      do 14. 07. 2026.
      Load Table
      pdf,
      Concrete screw UltraCut FBS II for temporary fastening - Permissible loads of a single anchor in normal concrete of strength class C20/25 to C50/60.
      Load Table
      pdf,
      Concrete screw Ultracut FBS II US hexagon head with integral washer and FBS II SK countersunk head - Permissible loads of a single anchor in normal concrete of strength class C20/25.
      Load Table
      pdf,
      Concrete screw UltraCut FBS II US/SK - Permissible loads for a single anchor in masonry for Push-through installation.
      Installation Instructions
      pdf,
      fischer UltraCut FBS II 8-14 GVZ/CP
      Marketing Documents
      pdf,
      UltraCut FBS II.
      cd-green-64c8fdbcdb-7mnqs