• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
Bolt anchor FBN II
  • Product Category Picture: "Bolt anchor FBN II"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
    • Application Picture
      The cost-efficient fixing for flexible use in non-cracked concrete.

      Bolt anchor FBN II

      The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.
      Produkt varijante
      Download of image data

      Produkt varijante

      Filter
      Filter
      Atesti / izvješća testova
      106 produkt varijanti
      Drill diameter
      Min. drill hole depth for through fixings
      Anchor length
      Max. usable length hef,stand./hef,min.
      Thread
      Width across nut
      Legenda = Posjeduje atest— = Ne posjeduje atest
      Više rezultata
      Pregledano 18 od 106 verzija

      Prednosti / opis proizvoda

      Advantages
      • The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
      • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
      • The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
      • Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
      • The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

      Upotreba i atesti

      Applications
      • Steel constructions
      • Guard rails
      • Consoles
      • Ladders
      • Cable trays
      • Machines
      • Staircases
      • Gates
      • Façades
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, non-cracked
      Suitable for:
      • Concrete C12/15
      • Natural stone with dense structure
      Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.
      Atesti
      • ETA-07/0211
      • ETA-18/0101
      • DoP No. 0098
      • DoP No. 0268
      • DoP No. 0192

      Uputstva za montažu

      Functionality
      • The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
      • Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
      • When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
      • The head embossing offers a simple control of the anchoring.
      • In the case of series installation, we recommend using the FABS bolt anchor setting tool.
      Mounting Strip 1 Picture
      1 / 5
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture

      Dokumenti za preuzimanje

      ETA Certification Document
      pdf, ETA-07/0211
      European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete
      izdato 13. 07. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0192
      Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)
      izdato 27. 07. 2020.
      ETA Certification Document
      pdf, ETA-18/0101
      European Technical Assessment for fischer Bolt Anchor FBN II HDG Torque controlled expansion anchor - Mechanical fasteners of sizes M8, M10, M12, M16 and M20 for use in uncracked concrete
      izdato 16. 07. 2018.
      DOP - Declaration of Performance
      pdf, DoP No. 0268
      Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)
      izdato 20. 01. 2021.
      DOP - Declaration of Performance
      pdf, DoP No. 0098
      Declaration of Performance for fischer Bolt Anchor FBN II HDG (Metal anchors for use in concrete with variable working life (heavy-duty type))
      izdato 23. 07. 2018.
      Load Table
      pdf,
      Bolt anchor FBN II - Permissible loads of a single anchor in normal concrete of strength class C20/25.
      Technical Data Sheet
      pdf,
      FBN II Durability
      Technical Data Sheet
      pdf,
      fischer bolt anchor FBN II HDG
      Marketing Documents
      pdf,
      Bolt anchor FBN II. The cost-efficient fixing for flexible use in non-cracked concrete.
      Slične proizviodne kategorije
      cd-green-64c8fdbcdb-ddxh7