fischer double-threaded screw STSI M10 x 181 mm A2, stainless steel A2

Name: fischer double-threaded screw STSI M10 x 181 mm A2, stainless steel A2
Brand: fischer

Warianty produktu

Download of image data

Top Features

Lower thread for steel
Upper metric thread
Incorporated EPDM gasket
Made of A2 stainless steel

Nr artykułu 518952
MW SA A2
Nr artykułu 071205
SSP 10 A2
Nr artykułu 522676
MW SU A2

Double-threaded screw for PV installations on corrugated panel roofs and steel load-bearing structures

Advantages

The STSI double-threaded screw is supplied pre-assembled with EPDM gasket, tightening nut and pair of nuts for connection to the MW or SSP brackets.
Quick installation because the roofing must not be removed during installation.
The integrated gasket enables better sealing against splashing rain.

STSI is the double-threaded screw in A2 stainless steel for fixing subframes of photovoltaic systems on corrugated panel or faux-barrel tile roofs to wooden load-bearing structure. Also suitable for installation on concrete with chemical injection mortar or in brick and cement structure with chemical injection mortar and FIS HK or FIS HN injection anchor sleeves. Incorporated EPDM gasket for sealing against rain infiltration.

Properties

Steel beams and rails with panel thickness between 2 to 4 mm

Functionality

Determine the length of the STSI double-threaded screw depending on the thickness of the load-bearing structure.
Determine the centre distance of the STSI double-threaded screws according to the snow and wind loads of the installation area and inclination of the roof.
Identify the position of the STSI double-threaded screws depending on the load-bearing structure and the layout of the installation.
Drill the support according to the diameter of the screw and the type of support. Use a pilot drill diameter of 6.8 mm for a steel thickness of 1.5-5.0 mm. Use a pilot drill diameter of 7.0 mm for a steel thickness of 6.0 mm and a pilot drill diameter of 7.2 mm for a steel thickness of 8.0 mm. For a steel thickness of > 10 mm, use a pilot drill diameter of 7.4 mm.
Screw the STSI double-threaded screw into the structure by putting the EPDM rubber in contact with the roof.
Tighten the MU nut on the gasket to maintain waterproofness.
Fix the SSP or MW connection plate, adjusting its height using the MU nuts.

Mounting Strip 1 Picture

1 / 6

Length ( l )	181 mm
Steel thread length ( l₁ )	70 mm
Metric thread length	50 mm
Thread ( M )	M10
Diameter ( d )	8 mm
Width across nut	13 mm
Width across nut ( SW₁ )	5 mm
Amount	10 pcs
GTIN (EAN-Code)	8001132046456

fischer double-threaded screw STSI M10 x 181 mm A2, stainless steel A2

Korzyści /opis produktu

Zastosowanie i aprobata

Instrukcja montażu

Dane techniczne

Dokumenty do pobrania