Universal adjustable clamps for PV panels with aluminium frame from 30 to 50 mm thickness.
Pre-assembled universal clamps PM U and PM C U
PM U and PM C U are the universal clamps for PV panels from 30 to 50 mm thickness which fit quickly inside the rails by simply rotating them. The PM U version can be used both as central or end clamp. The reduced size of PM C U version is optimized for central use only. Compatible with all Solar rails.
Für Ihre Filter konnten leider keine Produkte gefunden werden
Die Vorteile / Produktbeschreibung
Advantages
Universal clamps fit all framed PV panels from 30 mm to 50 mm thickness.
PM U pre-assembled universal clamp is suitable both for end or central use.
PM C U is the version specific for central use only. Its reduced width allows to optimize rail consumption and minimizes the distance between the panels.
PM U - PM C U clamps can be quickly installed at any point on the rail just by a rotation of 45°.
Countersunk head screw avoids shadowing on adjacent PV panels.
Thanks to the embedded spring, the PM U - PM C U pre-assembled universal clamps stay raised before the fastening, making the PV panels positioning phase easier.
Ready to install.
Available also in black anodized version.
Properties
Clamp in EN AB 46100 aluminium alloy in accordance with EN 755-2:2013.
A2-70 stainless steel Allen screw in accordance with EN ISO 3506-1/2:2009.
Please note: any oxidation stains are considered characteristic of aluminium. This in no way impairs the functionality of the product and is not covered by the warranty.
Black anodized products may shows little scratches due to packaging and transport.
Anwendung und Zulassung
Applications
Framed PV panels fastening on Solar rails. Compatible with PV-modules on the following profiles:
SolarFish H33
SolarFish H44
SolarFish H83
SolarMetal P
SolarMetal L
STFN RL Railless
Zulassungen
TUV - R 60154136
Montageanleitung
Functionality
Insert the embedded hammer head nut of the PM U / PM C U pre-assembled universal clamps into the upper side of the rail.
Turn the PM U universal clamp clockwise to use it as end clamp. Turn it anticlockwise to use it as a central clamp.
Turn the PM C U universal clamp clockwise.
Place the PM U / PM C U clamps in contact with the PV panels frame.
Lock the PV panels in position by tightening the clamp screw with a 10 Nm torque.
