Broj artikla 511979

fischer Zykon panel anchor FZP II 13 x 26 M8/SO/17 CARBON

Top Features

Stand-off installation of panels with tolerances.
Compensation of panel thickness tolerances for highest visual requirements.
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of carbon fibre reinforced polyamid.

The adjusting carbon fibre-reinforced undercut anchor for natural stone.

Advantages

Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

The concealed stand-off installation solution using carbon fibre-reinforced plastic undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses to create a flat façade by using stand-off installation anchors.

Functionality

The hole is drilled to a constant reference dimension for the remaining wall thickness (RWT).
The anchor is set through stand-off installation.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 4

ETA Certification Document

pdf, ETA-11/0145

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469

izdato 09. 06. 2022.

DOP - Declaration of Performance

pdf, DoP No. 0307

Declaration of Performance for fischer Zykon-panel anchor FZP II

izdato 01. 07. 2022.

DOP - Declaration of Performance

pdf, DoP No. 0261

Declaration of Performance for fischer Zykon-panel anchor FZP II

izdato 11. 01. 2021.

ETA Certification Document

pdf, ETA-22/0400

European Technical Assessment for fischer ZYKON FZP II for fixing Mirage facade panels

izdato 25. 08. 2022.

DOP - Declaration of Performance

pdf, DoP No. 0322

Declaration of Performance for fischer Zykon-panel anchor FZP II (for Mirage)

izdato 12. 10. 2022.

Pribor

ETA-approval
Anchorage depth ( h_ef )	15 - 21 mm
Min. panel thickness	30 mm
Type	Stand-off anchor
Total length ( l )	26 mm
Projection length	17 mm
Thread ( M )	M8
Cylindrical diameter	13 mm
Undercutdiameter	15,5 mm
Material	A4
Material sleeve	Carbon fibre reinforced plastic
Amount	250 pcs.
GTIN (EAN-Code)	4048962111668

fischer Zykon panel anchor FZP II 13 x 26 M8/SO/17 CARBON

Prednosti / opis proizvoda

Upotreba i atesti

Uputstva za montažu

Tehnički podaci

Dokumenti za preuzimanje